-
Designed to retain full TTL metering when using a hotshoe mounted Nikon Speedlight off-camera the SC-29 includes two additional connections for multiple flash set up (via optional TTL extension cords).
...
More
-
Designed to retain full TTL metering when using a hotshoe mounted Nikon Speedlight off-camera the SC-28 includes two additional connections for multiple flash set up (via optional TTL extension cords).
...
More
-
The Metz 45-56 NiMH rechargeable battery pack is designed for use in the Metz 45 CL/CT-1,3 and 4 and 45 CT-5 hammerhead flash units. NiMh technology means there is no need to fully discharge the battery before recharging it.
-
Spare / replacement battery for Metz 60 CT1 and 60 CT4 units - 6 volt.
-
High power NiMH battery giving up to three times more flashes than the standard pack and a reduction of the recycling time. Includes international charger.
...
More
-
The Metz battery holder 45-39 holds 6xAA single use batteries it is not designed to be used with rechargeable NiMh or NiCd cells.
-
Designed primarily for use with the Quantum T3 battery utilising the locking connection (although it can also be used with other Quantum batteries) the CZ2 coiled cable connects to Canon flashguns 430EZ, 480G, 540EZ, 550EX, 580EX and 580EX II.
-
Set of NiMH battery 45-57 plus international charger for 45 CL 4 digital, 45 CL/CT 1, 3, 4, 5. Can be used to upgrade older 45CL series guns.
-
For use with the 76 MZ5, 70 MZ5/4, and 50 MZ5 units. The latest generation of Metz batteries uses NiMH technology, meaning that recycling time can practically be halved - while nearly doubling the number of flashes! Capacity 1650mAh.
-
Designed primarily for use with the Quantum T3 battery utilising the locking connection (although it can also be used with other Quantum batteries) the CKE2 coiled cable connects to Nikon flashguns SB28, SB80, SB800 and SB900.