Nikon Camera Control Pro 2

Camera Control Pro 2 - Control. This software remotely controls most functions of Nikon digital SLRs from a computer that is connected via USB cable or through wired or wireless LAN using a wireless transmitter. Advanced functions of the new Nikon D3 and D300 such as Viewer for preview and selection of images prior to transfer to a computer, Liveview function and Picture Control System are supported. It also supports workflows of Nikon's exclusive photofinishing software Capture NX (optional) and browser and viewer software ViewNX. Nikon DSLR Compatibility: Nikon D3 & D300 - Supports wired or wireless LAN when used with wireless transmitter WT-4. D2 series (D2H, D2X, D2HS, D2XS) D1 series (D1, D1H, D1X) - D2X/D2HS/D2XS support wireless LAN when used with the WT-2. Windows Vista support currently not available Intel Mac: only Mac OS 10.4.9 supported. D200, D100, D80, D70 series (D70, D70S), D50, D40 series (D40, D40X) - D200 supports wired or wireless LAN when used with the WT-3.

The Key Features

• Remote control of most Nikon digital SLR settings, including exposure mode, shutter speed and aperture, from a computer
• Operation by wired and wireless LAN when using a wireless transmitter
• Direct transfer of images from a camera to a computer and workflow management of all procedures from shooting to saving images
• Enhanced Viewer function enables thumbnail display of images stored on a computer
• Images on a camera buffer can be confirmed or deleted with thumbnail or preview display on a computer prior to transfer
• Supports LiveView modes (Hand-held and Tripod) where the camera sensor is used to provide a real-time preview through the objective lens. LiveView support enables simultaneous adjustment of focus point and/or shutter release, and confirmation of the image on a computer screen. In Tripod mode, remote selection of the desired autofocus point is possible
• Supports the Picture Control system which allows image parameters to be selected and adjusted on a computer, and custom curves (tone compensation data) to be created and saved back to the camera

An upgraded version of the current Camera Control Pro will also be released simultaneously. Most settings of Nikon digital SLRs, that are connected via USB cable, such as exposure mode, shutter speed and aperture can be controlled remotely from a computer. Wired or wireless LAN is also available when using a wireless transmitter. In addition to direct transfer of images from a camera to a computer, all procedures from shooting to saving images are smoothly processed.

Viewer function enables thumbnail display of images stored in a computer. Images in a camera buffer can be confirmed with thumbnail or preview display on a computer prior to transferring, enabling deletion of unnecessary images. This remarkably increases efficiency. Supporting the Liveview mode (Hand-held mode and Tripod mode) of the D3 and D300, it permits adjustment of focus point and shutter release while confirming the image on a computer. In Tripod mode, focal-plane contrast AF on a desired point within a specific area is possible. It also supports Picture Control System of the cameras. Picture Control parameters can be selected and adjusted on a computer, and custom curves (tone compensation data) can be created and registered. 51-point AF can be controlled and displayed. Fine tuning of the new white balance is available.

Compatible Nikon digital SLRs

D3, D300 - Supports wired or wireless LAN when used with Wireless Transmitter WT-4.

D2 series (D2H, D2X, D2HS, D2XS) D1 series (D1, D1H, D1X) - D2X/D2HS/D2XS support wireless LAN when used with the WT-2. Windows Vista support currently not available Intel Mac: only Mac OS 10.4.9 supported

D200, D100, D80, D70 series (D70, D70S), D50, D40 series (D40, D40X) - D200 supports wired or wireless LAN when used with the WT-3.